Item Type: Auto-stamp Motorized Meso Machine
Model: Ultima A6
Needle Material: Titanium Alloy
Target Area: Face
Input: AC 100-240V 50 / 60Hz
Adapter: 5V, 1000mA
Pen Size: App 12.6 x 2cm
Package Size: App 17 x 12.5 x 5.5cm
Weight: About 390g
Concerns: Acne, Age Spots / Freckles, Blemishes, Early Signs of Aging, Wrinkles/Lines
1 x Host
1 x Manual
1 x US Adaptor
2 x Cartridges 12pin Needles
2 x Rechargeable Battery
1. Scar removal including acne scar removal or treatment.
2. Acne Scar Removal, Acne Scar Treatment.
3. Anti Wrinkle Treatment, Anti Aging.
4. Hair Loss Treatment or Hair Restoration.
5. Surgical Scar Removal.
6. Hyper pigmentation treatment.
7. treatment of acne scars and healing wounds.
How To Operate:
1. Setting Adapter Mode
(1) Plug in DC adaptor to the jack.
(2) Plug in DC adaptor to AC outlet.
2. How to install a cartridges
(1) Take out needle cartridge in the sterilized packing.
(2) Fitting round slots 1 into 2of machine, push needles cartridge horizontally up to the end.
(3) Lock the cartridge by turning it to the counter clockwise.
(4) Adjustment of needles length should be done after turn on the machine
(5) If you want to remove the needle cartridge, turn it to the clockwise and push out horizontally,
fitting round slots (slot 1,slot2)together.
3. Adjustment of speed and needle length
(1) Adjustment of Speed and ON/OFF
(2) 5 speed level control
Pressing the switch 2 seconds to open the device, It starts from the lowest speed to highest speed
when you turn on the power firstly.The speed cycles low to high .Please press the switch 2 seconds
when you need to stop the device.The flicker frequency of light faster, the speed is higher.
(3) Adjustment of needles length
You can adjust the length of needle by turning the adjustment ring clockwise or counter clockwise.
Turning it clockwise, length of it will be longer.Turning it counter clockwise, length of it will be shorter.
For your Safety, use one roller per one person only.
1. Do not force the roller into the skin but simply use mild pressure.
2. Roller obliquely at the same intensity covering the same areas vertically and horizontally.
3. Apply protocols according to clients"s needs.
4. After the treatment,apply post-care solutions for the skin protection.
5. For safety correct use,read the manual through before the roller.
1. The real color of the item may be slightly different from the pictures shown on website
caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight deviation for the measurement data.
3. Please allow 1-3cm error due to the hand measurement .
4. Due to different purchased,some product may have some LOGO.